AboutAerialLifts.com

U.S. Aerial Lift Market Overview

Home | Compare Lifts | Contact

Custom Truck One Source LT40 Forestry Aerial Lift

Terex LT40 Forestry aerial lift on RAM Chassis
Custom Truck One Source LT40 Forestry
Lift Class AO
Working Height 45.6 ft
Platform Height 40.6 ft
Side Reach 26.6 ft
Continuous Rotation Yes
Platform Capacity 350 lb
Platform Size 24 x 24 x 42 in
Controls "Control Plus" One Hand Control
Lower Boom Articulation 0° to 78°
Upper Boom Articulation -14° to 80°
Jib No
Tires 225/70Rx19.5G
Power Source Cummins 6.7L I6 Turbo Diesel 305 HP
Fuel Capacity 52.0 gal
Hydraulic Capacity 20.0 gal

LT40 Forestry Units have a working height of 45.6' on the RAM 5500 ST chassis!

Chassis Features

  • Ram 5500 ST Chassis
  • SCR Technology with DEF Tank
  • 52 Gallon Rear Fuel Tank
  • 84" Cab to Axle
  • 6 Speed Automatic Transmission
  • Anti Lock 4 Wheel Disc Brakes
  • 7,000 lb Front Axle
  • 13,500 lb Rear Axle with Anti-Spin Differential
  • Factory De-Rated to 19,500 lb GVWR
  • 50-State Emissions Compliant, CA. Clean Idle
  • AM/FM/CD/MP3 Radio
  • Air Conditioning
  • Engine Block Heater

Standard Configuration
  • 7'6" Chip Box with Hoist Assembly
  • 11"W x 18"H x 96"D Platform Pole Saw Box
  • 24"W x 20"H x 18"D Vented Underbody Tool Box
  • 36"W x 47"H x 15"D Cabinet Box with Rope Hooks
  • Rear Bumper with Combo Hitch
  • Spring Mounted Cab Guard with Access Ladder
  • 2 Wheel Chocks with Underbody Storage
  • 2 Outrigger Pads with Underbody Storage
  • Electronic Trailer Brake Controller
  • Hydraulic Tool Outlet at Platform

Chip Box
  • 6-7 Cubic Yard Chip Capacity
  • Built from Steel Members, Coated with PPG CRE
  • Curb Side Ladder & Pole
  • Storage Box
  • Sides, Front & Roof are 14 Gauge Galvanneal with
  • 1 1/4" Deep x 3" Wide Die Formed Reinforcing Ribs
  • The Floor is 12 Gauge Galvanneal
  • The Body Interior is Finished with PPG CRE
  • The Tailgate is 22 1/2" High and Curb-Side Hinged

Lift Features

  • Hi-Ranger LT40 Insulated Telescopic Aerial Device
  • Vinyl Platform and Control Cover
  • Bucket Liner
  • Auxiliary Let Down
  • Safety Harness with Attached Lanyard
  • Upper Boom Rest Tie Down
  • Hydraulic Platform Tilt at Lower Control
  • Full Pressure, Open Center Hydraulic System
  • Continuous Unrestricted Worm Gear Rotation
  • Hydraulic Platform Leveling
  • Dual Hydraulic Tool Outlets at Platform
  • H Style Outriggers

Last Review: 2018-12-21