Custom Truck One Source XT56 Pro Forestry Aerial Lift
| Custom Truck One Source XT56 Pro Forestry | |
|---|---|
| Lift Class | AO |
| Working Height | 61.0 ft |
| Platform Height | 60.0 ft |
| Side Reach | 45.6 ft |
| Continuous Rotation | Yes |
| Platform Capacity | 400 lb |
| Platform Size | 24 x 24 x 40 in |
| Controls | 3D One Hand Control |
| Lower Boom Articulation | 0° to 125° |
| Upper Boom Articulation | 0° to 250° |
| Jib | No |
| Tires | 11R22.5G |
| Power Source | Cummins 6.7L ISB Diesel 220 HP |
| Fuel Capacity | 50.0 gal |
| Hydraulic Capacity | 50.0 gal |
XT56 Pro Forestry Units have a working height of 61' on the Freightliner chassis! They are under CDL and are available with either an Allison 2500 RDS or 6 speed manual transmission.
Chassis Features
- Freightliner Business Class M2 106, painted white
- Cummins 6.7L ISB Diesel, 220hp
- SCR Technology with 5 Gallon DEF Tank
- 50 Gallon Aluminum Fuel Tank
- 121" Cab on Axle
- Allison Automatic or 6 Speed Manual Transmission
- Air Brakes or Hydraulic Brakes
- 10,000 lb Set Back Front Axle
- 19,000 lb Rear Axle
- Factory De-Rated 26,000 lb GVWR (under CDL)
- 50-State Emissions Compliant, CA Clean Idle
- Engine Block Heater
- Air Conditioning
- Dust/Bug Screen Mounted Behind Grill
- Weather Bank AM/FM Radio
- Mud Flaps
- 11' Chip Box and Hoist Assembly with Holding Valve
- 48'' Door Thru Box
- Spring Loaded Cab Guard with Steps and Grab Handles
- Factory Dash Mounted PTO Switch
- 2 Wheel Chocks with Underbody Storage
- 2 Outrigger Pads with Underbody Storage
- ICC Rear Bumper with T100 Pintle Hook
- Electronic Trailer Break Controller
- 6 Prong Trailer Socket
- 33 Gallon Hydraulic Reservoir
- 12 to 14 Cubic Yards
- Primed, Painted and Clear Coated
- Interior of Chip Box & Undercarriage are Painted with PPG CRE
- Sides, Roof and Front are 14-Gauge Galvanneal
- LED Lighting
- Curb Side Ladder Box with Wider Compartment
- Floor is 12-Gauge Galvanneal
- Tail Gate is Curb Side Hinged for Safety
- Rear Tail Plate Tied into Sub Frame for Rigidity
- Vented Sides for Air Evacuation While Chipping
Lift Features
- Overcenter Side Reach: 45.6'
- Non-Overcenter Side Reach: 41.5'
- Side Mounted 24" x 24" x 40" One Person Platform
- Control-Plus 3-D Single Stick at Platform
- Category C Rating Per ANSI A92.2
- Fiberglass Booms
- Rectangular, Bi-Axial Epoxy Resin, Filament Wound
- Individual Lever Lower Controls
- Mechanical Platform Leveling
- Full Pressure, Open-Center Hydraulic System
- Padded Boom Rests with Upper Boom Tie Down
- Boom / Outrigger Interlock
- Moving Outrigger Alarm, Truck Level Indicators
- 10 Year Maintenance Free Leveling Chain
- Dual Hydraulic Tool Outlet at Boom Tip
- Manual Platform Tilt
Last Review: 2018-12-13