Custom Truck One Source XT70 Pro Forestry Aerial Lift
Custom Truck One Source XT70 Pro Forestry | |
---|---|
Lift Class | AO |
Working Height | 75.0 ft |
Platform Height | 70.0 ft |
Side Reach | 49.9 ft |
Continuous Rotation | Yes |
Platform Capacity | 400 lb |
Platform Size | 24 x 24 x 40 in |
Controls | 3D One Hand Control |
Lower Boom Articulation | 0° to 125° |
Upper Boom Articulation | 0° to 250° |
Jib | No |
Tires | 11R22.5G |
Power Source | Cummins ISB Diesel, 250 HP |
Fuel Capacity | 50.0 gal |
Hydraulic Capacity | 40.0 gal |
XT70 Pro Forestry Units have a working height of 75' on the Frightliner chassis! They are under CDL and are available with either an Allison 3500 RDS or 6 speed manual transmission.
Chassis Features
- Freightliner Business Class M2 106, painted white
- Cummins ISB Diesel, 250hp
- SCR Technology with 5 Gallon DEF Tank
- 50 Gallon Aluminum Fuel Tank
- 138" Cab on Axle
- Allison 3500 RDS or 6 Speed Manual Transmission
- Air Brakes
- 13,300 lb Set Back Front Axle
- 21,000 lb Rear Axle
- Factory De-Rated to 33,000 GVWR
- 50-State Emissions Compliant, CA Clean Idle
- Engine Block Heater
- Air Conditioning
- Dust/Bug Screen Mounted Behind Grill
- Weather Bank AM/FM Radio
- Mud Flaps
- 11' Chip Box and Hoist Assembly with Holding Valve
- 44"x50"x25" 2-Door Cabinet Box w/Rope Hooks
- 36"x13"x25" Thru/Pole Box w/Drop Door
- 72"x50"x22" 3-Door Cabinet Thru Box
- Spring Loaded Cab Guard w/ Steps and Grab Handles
- Dash Mounted PTO Switch
- 2 Wheel Chocks with Underbody Storage
- 2 Outrigger Pads with Underbody Storage
- ICC Rear Bumper with PH30 Pintle Hook
- Electronic Trailer Brake Controller
- 6 Prong Trailer Socket
- 12 to 14 Cubic Yards
- Primed, Painted and Clear Coated
- Sides, Roof and Front are 14-Guage Galvanneal
- LED Lighting
- Curb Side Ladder Box (Fits Gas Pruner)
- Floor is 12-Guage Galvanneal
- Tail Gate is Curb Side Hinged for Safety
- Rear Tail Plate Tied into Sub Frame for Rigidity
- Vented Sides for Air Evacuation While Chipping
Lift Features
- Overcenter Side Reach: 49.9'
- Non-Overcenter Side Reach: 45'
- Side Mounted 24" x 24" x 40" One Person Platform
- Control-Plus 3-D Single Stick at Platform
- Category C Rating Per ANSI A92.2
- Fiberglass Booms
- Rectangular, Bi-Axial Epoxy Resin, Filament Wound
- Individual Lever Lower Controls
- Mechanical Platform Leveling
- Full Pressure, Open-Center Hydraulic System
- Padded Boom Rests with Upper Boom Tie Down
- Boom / Outrigger Interlock
- Moving Outrigger Alarm, Truck Level Indicators
- 10 Year Maintenance Free Leveling Chain
- Dual Hydraulic Tool Outlet at Boom Tip
- Manual Platform Tilt
Last Review: 2018-12-15